What replaces FAG (Schaeffler) 6011.2ZR?

The 6011.2ZR can be replaced by equivalent bearings from other manufacturers: Timken 6011, FAG (Schaeffler) 6011, NTN 6011, Timken 91011K, KOYO (JTEKT) 6011. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 6011.2ZR?

The FAG (Schaeffler) 6011.2ZR has a bore diameter of 55.000mm, outer diameter of 90.000mm, and width of 18.000mm.

FAG (Schaeffler)

Bearing

6011.2ZR

deep groove bearing, 55mm bore, shielded

Specifications

Bore (d)	55.000 mm
Outer Diameter (D)	90.000 mm
Width (B)	18.000 mm
Seal Type	2Z (Metal Shield)
Bearing Type	Deep Groove
Dynamic Load (C)	22.300 kN
Static Load (C₀)	14.700 kN
Speed — Grease	7,500 RPM
Speed — Oil	9,500 RPM
Temperature Range	-30°C to 120°C
Rows	1

Cross-References(16)

Timken601155.000 mm × 90.000 mm × 18.000 mm
→
FAG (Schaeffler)601155.000 mm × 90.000 mm × 18.000 mm
→
NTN601155.000 mm × 90.000 mm × 18.000 mm
→
Timken91011K55.000 mm × 90.000 mm × 18.000 mm
→
KOYO (JTEKT)601155.000 mm × 90.000 mm × 18.000 mm
→
NTN601155.000 mm × 90.000 mm × 18.000 mm
→
Timken91011K55.000 mm × 90.000 mm × 18.000 mm
→
KOYO (JTEKT)601155.000 mm × 90.000 mm × 18.000 mm
→
NSK601155.000 mm × 90.000 mm × 18.000 mm
→
Timken601155.000 mm × 90.000 mm × 18.000 mm
→
NSK601155.000 mm × 90.000 mm × 18.000 mm
→
FAG (Schaeffler)601155.000 mm × 90.000 mm × 18.000 mm
→
SKF6011-2Z55.000 mm × 90.000 mm × 18.000 mm
→
SKF6011-2RSH55.000 mm × 90.000 mm × 18.000 mm
→
SKF6011-2Z55.000 mm × 90.000 mm × 18.000 mm
→
SKF6011-2RSH55.000 mm × 90.000 mm × 18.000 mm
→

Need help finding the right bearing?

Ask BearingBrain →