What replaces FAG (Schaeffler) 6304-2Z?

The 6304-2Z can be replaced by equivalent bearings from other manufacturers: NSK 6304ZZ, FAG (Schaeffler) 6304-2Z, Timken 304KDD, NTN 6304ZZ, KOYO (JTEKT) 6304-2RZ. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 6304-2Z?

The FAG (Schaeffler) 6304-2Z has a bore diameter of 20.000mm, outer diameter of 52.000mm, and width of 15.000mm.

FAG (Schaeffler)

Bearing

6304-2Z

Medium series deep groove ball bearing, 20mm bore, metal shielded both sides

Specifications

Bore (d)	20.000 mm
Outer Diameter (D)	52.000 mm
Width (B)	15.000 mm
Seal Type	2Z (Metal Shield)
Bearing Type	Deep Groove
Dynamic Load (C)	15.900 kN
Static Load (C₀)	7.800 kN
Speed — Grease	15,200 RPM
Speed — Oil	19,000 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN

Cross-References(23)

NSK6304ZZ20.000 mm × 52.000 mm × 15.000 mm
→
FAG (Schaeffler)6304-2Z20.000 mm × 52.000 mm × 15.000 mm
→
Timken304KDD20.000 mm × 52.000 mm × 15.000 mm
→
NTN6304ZZ20.000 mm × 52.000 mm × 15.000 mm
→
KOYO (JTEKT)6304-2RZ20.000 mm × 52.000 mm × 15.000 mm
→
FAG (Schaeffler)6304-2Z20.000 mm × 52.000 mm × 15.000 mm
→
NTN6304ZZ20.000 mm × 52.000 mm × 15.000 mm
→
Timken304KDD20.000 mm × 52.000 mm × 15.000 mm
→
KOYO (JTEKT)6304-2RZ20.000 mm × 52.000 mm × 15.000 mm
→
KOYO (JTEKT)6304ZZ20.000 mm × 52.000 mm × 15.000 mm
→
Timken6304ZZ20.000 mm × 52.000 mm × 15.000 mm
→
FAG (Schaeffler)6304.2ZR20.000 mm × 52.000 mm × 15.000 mm
→
KOYO (JTEKT)6304ZZ20.000 mm × 52.000 mm × 15.000 mm
→
Timken6304ZZ20.000 mm × 52.000 mm × 15.000 mm
→
FAG (Schaeffler)6304.2ZR20.000 mm × 52.000 mm × 15.000 mm
→
NSK6304ZZ20.000 mm × 52.000 mm × 15.000 mm
→
SKF6304-2RS120.000 mm × 52.000 mm × 15.000 mm
→
SKF630420.000 mm × 52.000 mm × 15.000 mm
→
SKF6304-2RSH20.000 mm × 52.000 mm × 15.000 mm
→
SKF6304-2RSH20.000 mm × 52.000 mm × 15.000 mm
→
SKF630420.000 mm × 52.000 mm × 15.000 mm
→
SKF6204-2Z20.000 mm × 47.000 mm × 14.000 mm
→
SKF6204-2Z20.000 mm × 47.000 mm × 14.000 mm
→

Need help finding the right bearing?

Ask BearingBrain →