What replaces KOYO (JTEKT) 6013-2RS1?

The 6013-2RS1 can be replaced by equivalent bearings from other manufacturers: NSK 6013DDU, FAG (Schaeffler) 6013.2RSR, Timken 60132RS, NTN 6013LLU, KOYO (JTEKT) 60132RS. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 6013-2RS1?

The KOYO (JTEKT) 6013-2RS1 has a bore diameter of 65.000mm, outer diameter of 100.000mm, and width of 18.000mm.

KOYO (JTEKT)

Bearing

6013-2RS1

Name: KOYO (JTEKT) 6013-2RS1
Brand: KOYO (JTEKT)
SKU: 6013-2RS1

Deep groove ball bearing with seals or shields

Zoro ↗·Amazon ↗

Specifications

Bore (d)	65.000 mm
Outer Diameter (D)	100.000 mm
Width (B)	18.000 mm
Seal Type	2RS (Rubber Seal)
Bearing Type	Deep Groove
Dynamic Load (C)	31.900 kN
Static Load (C₀)	25.000 kN
Speed — Grease	6,154 RPM
Speed — Oil	4,000 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN/Normal

KOYO equivalent

Cross-References(20)

NSK6013DDU65.000 mm × 100.000 mm × 18.000 mm
→
FAG (Schaeffler)6013.2RSR65.000 mm × 100.000 mm × 18.000 mm
→
Timken60132RS65.000 mm × 100.000 mm × 18.000 mm
→
NTN6013LLU65.000 mm × 100.000 mm × 18.000 mm
→
KOYO (JTEKT)60132RS65.000 mm × 100.000 mm × 18.000 mm
→
NSK6013DDU65.000 mm × 100.000 mm × 18.000 mm
→
FAG (Schaeffler)6013.2RSR65.000 mm × 100.000 mm × 18.000 mm
→
Timken60132RS65.000 mm × 100.000 mm × 18.000 mm
→
NTN6013LLU65.000 mm × 100.000 mm × 18.000 mm
→
KOYO (JTEKT)60132RS65.000 mm × 100.000 mm × 18.000 mm
→
INA (Schaeffler)6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
MinebeaMitsumi (NMB)6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
RBC Bearings6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
Peer Bearing6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
Nachi Fujikoshi6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
NSK6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
NTN6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
FAG (Schaeffler)6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
Timken6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→
KOYO (JTEKT)6013-2RS165.000 mm × 100.000 mm × 18.000 mm
→

Need help finding the right bearing?

Ask BearingBrain →