What replaces MinebeaMitsumi (NMB) 6011-2RSH?

The 6011-2RSH can be replaced by equivalent bearings from other manufacturers: NSK 6011, FAG (Schaeffler) 6011, NTN 6011, Timken 91011K, KOYO (JTEKT) 6011. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 6011-2RSH?

The MinebeaMitsumi (NMB) 6011-2RSH has a bore diameter of 55.000mm, outer diameter of 90.000mm, and width of 18.000mm.

MinebeaMitsumi (NMB)

Bearing

6011-2RSH

Name: MinebeaMitsumi (NMB) 6011-2RSH
Brand: MinebeaMitsumi (NMB)
SKU: 6011-2RSH

Extra light series deep groove ball bearing, 55mm bore, rubber sealed both sides

Zoro ↗·Amazon ↗

Specifications

Bore (d)	55.000 mm
Outer Diameter (D)	90.000 mm
Width (B)	18.000 mm
Seal Type	2RS (Rubber Seal)
Bearing Type	Deep Groove
Dynamic Load (C)	29.600 kN
Static Load (C₀)	22.000 kN
Speed — Grease	7,225 RPM
Speed — Oil	9,350 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN/Normal

NMB equivalent

Cross-References(21)

NSK601155.000 mm × 90.000 mm × 18.000 mm
→
FAG (Schaeffler)601155.000 mm × 90.000 mm × 18.000 mm
→
NTN601155.000 mm × 90.000 mm × 18.000 mm
→
Timken91011K55.000 mm × 90.000 mm × 18.000 mm
→
KOYO (JTEKT)601155.000 mm × 90.000 mm × 18.000 mm
→
Timken601155.000 mm × 90.000 mm × 18.000 mm
→
NSK601155.000 mm × 90.000 mm × 18.000 mm
→
FAG (Schaeffler)601155.000 mm × 90.000 mm × 18.000 mm
→
NTN601155.000 mm × 90.000 mm × 18.000 mm
→
Timken91011K55.000 mm × 90.000 mm × 18.000 mm
→
KOYO (JTEKT)601155.000 mm × 90.000 mm × 18.000 mm
→
Timken601155.000 mm × 90.000 mm × 18.000 mm
→
Peer Bearing601155.000 mm × 90.000 mm × 18.000 mm
→
Nachi Fujikoshi601155.000 mm × 90.000 mm × 18.000 mm
→
INA (Schaeffler)601155.000 mm × 90.000 mm × 18.000 mm
→
MinebeaMitsumi (NMB)601155.000 mm × 90.000 mm × 18.000 mm
→
RBC Bearings601155.000 mm × 90.000 mm × 18.000 mm
→
SKF6011-2RSH55.000 mm × 90.000 mm × 18.000 mm
→
SKF6011-2Z55.000 mm × 90.000 mm × 18.000 mm
→
SKF6011-2RSH55.000 mm × 90.000 mm × 18.000 mm
→
SKF6011-2Z55.000 mm × 90.000 mm × 18.000 mm
→

Need help finding the right bearing?

Ask BearingBrain →