What replaces NTN 6211LLU?

The 6211LLU can be replaced by equivalent bearings from other manufacturers: FAG (Schaeffler) 6211.2RSR, Timken 211PP, SKF 6211-2RSH, KOYO (JTEKT) 6211-2RS, KOYO (JTEKT) 62112RS. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 6211LLU?

The NTN 6211LLU has a bore diameter of 55.000mm, outer diameter of 100.000mm, and width of 21.000mm.

NTN

Bearing

6211LLU

deep groove bearing, 55mm bore, sealed

Specifications

Bore (d)	55.000 mm
Outer Diameter (D)	100.000 mm
Width (B)	21.000 mm
Seal Type	2RS (Rubber Seal)
Bearing Type	Deep Groove
Dynamic Load (C)	42.300 kN
Static Load (C₀)	24.300 kN
Speed — Grease	6,300 RPM
Speed — Oil	8,000 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN

Cross-References(24)

FAG (Schaeffler)6211.2RSR55.000 mm × 100.000 mm × 21.000 mm
→
Timken211PP55.000 mm × 100.000 mm × 21.000 mm
→
SKF6211-2RSH55.000 mm × 100.000 mm × 21.000 mm
→
KOYO (JTEKT)6211-2RS55.000 mm × 100.000 mm × 21.000 mm
→
KOYO (JTEKT)62112RS55.000 mm × 100.000 mm × 21.000 mm
→
Timken62112RS55.000 mm × 100.000 mm × 21.000 mm
→
KOYO (JTEKT)6211-2RS55.000 mm × 100.000 mm × 21.000 mm
→
SKF6211-2RSH55.000 mm × 100.000 mm × 21.000 mm
→
NSK6211DDU55.000 mm × 100.000 mm × 21.000 mm
→
FAG (Schaeffler)6211-2RSR55.000 mm × 100.000 mm × 21.000 mm
→
Timken211PP55.000 mm × 100.000 mm × 21.000 mm
→
KOYO (JTEKT)62112RS55.000 mm × 100.000 mm × 21.000 mm
→
Timken62112RS55.000 mm × 100.000 mm × 21.000 mm
→
FAG (Schaeffler)6211.2RSR55.000 mm × 100.000 mm × 21.000 mm
→
SKF6211-2RS155.000 mm × 100.000 mm × 21.000 mm
→
SKF6211-2RS155.000 mm × 100.000 mm × 21.000 mm
→
NSK6211DDU55.000 mm × 100.000 mm × 21.000 mm
→
FAG (Schaeffler)6211-2RSR55.000 mm × 100.000 mm × 21.000 mm
→
NTN6211ZZ55.000 mm × 100.000 mm × 21.000 mm
→
NTN621155.000 mm × 100.000 mm × 21.000 mm
→
NTN6211ZZ55.000 mm × 100.000 mm × 21.000 mm
→
NTN621155.000 mm × 100.000 mm × 21.000 mm
→
NTN6311LLU55.000 mm × 120.000 mm × 29.000 mm
→
NTN6311LLU55.000 mm × 120.000 mm × 29.000 mm
→

Need help finding the right bearing?

Ask BearingBrain →