What replaces NTN 6309LLU?

The 6309LLU can be replaced by equivalent bearings from other manufacturers: FAG (Schaeffler) 6309.2RSR, Timken 309PP, SKF 6309-2RSH, KOYO (JTEKT) 6309-2RS, KOYO (JTEKT) 63092RS. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 6309LLU?

The NTN 6309LLU has a bore diameter of 45.000mm, outer diameter of 100.000mm, and width of 25.000mm.

NTN

Bearing

6309LLU

deep groove bearing, 45mm bore, sealed

Specifications

Bore (d)	45.000 mm
Outer Diameter (D)	100.000 mm
Width (B)	25.000 mm
Seal Type	2RS (Rubber Seal)
Bearing Type	Deep Groove
Dynamic Load (C)	51.100 kN
Static Load (C₀)	29.100 kN
Speed — Grease	6,000 RPM
Speed — Oil	7,500 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN

Cross-References(24)

FAG (Schaeffler)6309.2RSR45.000 mm × 100.000 mm × 25.000 mm
→
Timken309PP45.000 mm × 100.000 mm × 25.000 mm
→
SKF6309-2RSH45.000 mm × 100.000 mm × 25.000 mm
→
KOYO (JTEKT)6309-2RS45.000 mm × 100.000 mm × 25.000 mm
→
KOYO (JTEKT)63092RS45.000 mm × 100.000 mm × 25.000 mm
→
Timken63092RS45.000 mm × 100.000 mm × 25.000 mm
→
KOYO (JTEKT)6309-2RS45.000 mm × 100.000 mm × 25.000 mm
→
SKF6309-2RSH45.000 mm × 100.000 mm × 25.000 mm
→
NSK6309DDU45.000 mm × 100.000 mm × 25.000 mm
→
FAG (Schaeffler)6309-2RSR45.000 mm × 100.000 mm × 25.000 mm
→
Timken309PP45.000 mm × 100.000 mm × 25.000 mm
→
KOYO (JTEKT)63092RS45.000 mm × 100.000 mm × 25.000 mm
→
Timken63092RS45.000 mm × 100.000 mm × 25.000 mm
→
FAG (Schaeffler)6309.2RSR45.000 mm × 100.000 mm × 25.000 mm
→
SKF6309-2RS145.000 mm × 100.000 mm × 25.000 mm
→
SKF6309-2RS145.000 mm × 100.000 mm × 25.000 mm
→
NSK6309DDU45.000 mm × 100.000 mm × 25.000 mm
→
FAG (Schaeffler)6309-2RSR45.000 mm × 100.000 mm × 25.000 mm
→
NTN6309ZZ45.000 mm × 100.000 mm × 25.000 mm
→
NTN630945.000 mm × 100.000 mm × 25.000 mm
→
NTN6309ZZ45.000 mm × 100.000 mm × 25.000 mm
→
NTN630945.000 mm × 100.000 mm × 25.000 mm
→
NTN6209LLU45.000 mm × 85.000 mm × 19.000 mm
→
NTN6209LLU45.000 mm × 85.000 mm × 19.000 mm
→

Need help finding the right bearing?

Ask BearingBrain →