What replaces SKF 51216?

The 51216 can be replaced by equivalent bearings from other manufacturers: NSK 51216, NTN 51216, FAG (Schaeffler) 51216, Timken 51216, KOYO (JTEKT) 51216. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 51216?

The SKF 51216 has a bore diameter of 80.000mm, outer diameter of 115.000mm, and width of 28.000mm.

How much does a SKF 51216 cost?

The 51216 is available from approximately $54.79. Prices vary by supplier and quantity.

SKF

Bearing

51216

Name: SKF 51216
Brand: SKF
SKU: 51216
Availability: InStock

Single direction thrust ball bearing

From ~$54.79at Zoro

Zoro ↗·Amazon ↗

$54.79 part + $2.74 service fee · Supplied by Zoro

Specifications

Bore (d)	80.000 mm
Outer Diameter (D)	115.000 mm
Width (B)	28.000 mm
Seal Type	Open
Bearing Type	Thrust
Dynamic Load (C)	76.100 kN
Static Load (C₀)	208.000 kN
Speed — Grease	2,400 RPM
Speed — Oil	3,400 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN/Normal

Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Cross-References(10)

NSK5121680.000 mm × 115.000 mm × 28.000 mm
~$49.66→
NTN5121680.000 mm × 115.000 mm × 28.000 mm
~$47.94→
FAG (Schaeffler)5121680.000 mm × 115.000 mm × 28.000 mm
~$52.22→
Timken5121680.000 mm × 115.000 mm × 28.000 mm
~$50.51→
KOYO (JTEKT)5121680.000 mm × 115.000 mm × 28.000 mm
~$47.09→
INA (Schaeffler)5121680.000 mm × 115.000 mm × 28.000 mm
~$42.81→
MinebeaMitsumi (NMB)5121680.000 mm × 115.000 mm × 28.000 mm
~$42.81→
RBC Bearings5121680.000 mm × 115.000 mm × 28.000 mm
~$42.81→
Peer Bearing5121680.000 mm × 115.000 mm × 28.000 mm
~$42.81→
Nachi Fujikoshi5121680.000 mm × 115.000 mm × 28.000 mm
~$42.81→

Need help finding the right bearing?

Ask BearingBrain →