What replaces SKF 51222?

The 51222 can be replaced by equivalent bearings from other manufacturers: NSK 51222, NTN 51222, FAG (Schaeffler) 51222, Timken 51222, KOYO (JTEKT) 51222. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 51222?

The SKF 51222 has a bore diameter of 110.000mm, outer diameter of 160.000mm, and width of 38.000mm.

How much does a SKF 51222 cost?

The 51222 is available from approximately $77.18. Prices vary by supplier and quantity.

SKF

Bearing

51222

Name: SKF 51222
Brand: SKF
SKU: 51222
Availability: InStock

Single direction thrust ball bearing

From ~$77.18at Zoro

Zoro ↗·Amazon ↗

$77.18 part + $3.86 service fee · Supplied by Zoro

Specifications

Bore (d)	110.000 mm
Outer Diameter (D)	160.000 mm
Width (B)	38.000 mm
Seal Type	Open
Bearing Type	Thrust
Dynamic Load (C)	125.000 kN
Static Load (C₀)	365.000 kN
Speed — Grease	1,700 RPM
Speed — Oil	2,400 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN/Normal

Single direction thrust ball bearings can accommodate axial loads in one direction. They must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Cross-References(10)

NSK51222110.000 mm × 160.000 mm × 38.000 mm
~$69.95→
NTN51222110.000 mm × 160.000 mm × 38.000 mm
~$67.54→
FAG (Schaeffler)51222110.000 mm × 160.000 mm × 38.000 mm
~$73.57→
Timken51222110.000 mm × 160.000 mm × 38.000 mm
~$71.15→
KOYO (JTEKT)51222110.000 mm × 160.000 mm × 38.000 mm
~$66.33→
INA (Schaeffler)51222110.000 mm × 160.000 mm × 38.000 mm
~$60.30→
MinebeaMitsumi (NMB)51222110.000 mm × 160.000 mm × 38.000 mm
~$60.30→
RBC Bearings51222110.000 mm × 160.000 mm × 38.000 mm
~$60.30→
Peer Bearing51222110.000 mm × 160.000 mm × 38.000 mm
~$60.30→
Nachi Fujikoshi51222110.000 mm × 160.000 mm × 38.000 mm
~$60.30→

Need help finding the right bearing?

Ask BearingBrain →