52211

Specifications

Double direction thrust ball bearings can accommodate axial loads in both directions, but they must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections, and many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Cross-References(10)

• NSK5221145.000 mm × 90.000 mm × 45.000 mm
  ~$42.89→
• NTN5221145.000 mm × 90.000 mm × 45.000 mm
  ~$41.41→
• FAG (Schaeffler)5221145.000 mm × 90.000 mm × 45.000 mm
  ~$45.10→
• Timken5221145.000 mm × 90.000 mm × 45.000 mm
  ~$43.62→
• KOYO (JTEKT)5221145.000 mm × 90.000 mm × 45.000 mm
  ~$40.67→
• INA (Schaeffler)5221145.000 mm × 90.000 mm × 45.000 mm
  ~$36.97→
• MinebeaMitsumi (NMB)5221145.000 mm × 90.000 mm × 45.000 mm
  ~$36.97→
• RBC Bearings5221145.000 mm × 90.000 mm × 45.000 mm
  ~$36.97→
• Peer Bearing5221145.000 mm × 90.000 mm × 45.000 mm
  ~$36.97→
• Nachi Fujikoshi5221145.000 mm × 90.000 mm × 45.000 mm
  ~$36.97→