What replaces SKF 52215?

The 52215 can be replaced by equivalent bearings from other manufacturers: NSK 52215, NTN 52215, FAG (Schaeffler) 52215, Timken 52215, KOYO (JTEKT) 52215. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 52215?

The SKF 52215 has a bore diameter of 60.000mm, outer diameter of 110.000mm, and width of 47.000mm.

How much does a SKF 52215 cost?

The 52215 is available from approximately $54.26. Prices vary by supplier and quantity.

SKF

Bearing

52215

Name: SKF 52215
Brand: SKF
SKU: 52215
Availability: InStock

Double direction thrust ball bearing

From ~$54.26at Zoro

Zoro ↗·Amazon ↗

$54.26 part + $2.71 service fee · Supplied by Zoro

Specifications

Bore (d)	60.000 mm
Outer Diameter (D)	110.000 mm
Width (B)	47.000 mm
Seal Type	Open
Bearing Type	Thrust
Dynamic Load (C)	63.700 kN
Static Load (C₀)	170.000 kN
Speed — Grease	1,900 RPM
Speed — Oil	2,600 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN/Normal

Double direction thrust ball bearings can accommodate axial loads in both directions, but they must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections, and many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Cross-References(10)

NSK5221560.000 mm × 110.000 mm × 47.000 mm
~$49.18→
NTN5221560.000 mm × 110.000 mm × 47.000 mm
~$47.48→
FAG (Schaeffler)5221560.000 mm × 110.000 mm × 47.000 mm
~$51.72→
Timken5221560.000 mm × 110.000 mm × 47.000 mm
~$50.02→
KOYO (JTEKT)5221560.000 mm × 110.000 mm × 47.000 mm
~$46.63→
INA (Schaeffler)5221560.000 mm × 110.000 mm × 47.000 mm
~$42.39→
MinebeaMitsumi (NMB)5221560.000 mm × 110.000 mm × 47.000 mm
~$42.39→
RBC Bearings5221560.000 mm × 110.000 mm × 47.000 mm
~$42.39→
Peer Bearing5221560.000 mm × 110.000 mm × 47.000 mm
~$42.39→
Nachi Fujikoshi5221560.000 mm × 110.000 mm × 47.000 mm
~$42.39→

Need help finding the right bearing?

Ask BearingBrain →