52222

Specifications

Double direction thrust ball bearings can accommodate axial loads in both directions, but they must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections, and many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Cross-References(10)

• NSK5222295.000 mm × 160.000 mm × 67.000 mm
  ~$76.21→
• NTN5222295.000 mm × 160.000 mm × 67.000 mm
  ~$73.58→
• FAG (Schaeffler)5222295.000 mm × 160.000 mm × 67.000 mm
  ~$80.15→
• Timken5222295.000 mm × 160.000 mm × 67.000 mm
  ~$77.53→
• KOYO (JTEKT)5222295.000 mm × 160.000 mm × 67.000 mm
  ~$72.27→
• INA (Schaeffler)5222295.000 mm × 160.000 mm × 67.000 mm
  ~$65.70→
• MinebeaMitsumi (NMB)5222295.000 mm × 160.000 mm × 67.000 mm
  ~$65.70→
• RBC Bearings5222295.000 mm × 160.000 mm × 67.000 mm
  ~$65.70→
• Peer Bearing5222295.000 mm × 160.000 mm × 67.000 mm
  ~$65.70→
• Nachi Fujikoshi5222295.000 mm × 160.000 mm × 67.000 mm
  ~$65.70→