52311

Specifications

Double direction thrust ball bearings can accommodate axial loads in both directions, but they must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections, and many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Cross-References(10)

• NSK5231145.000 mm × 105.000 mm × 64.000 mm
  ~$56.20→
• NTN5231145.000 mm × 105.000 mm × 64.000 mm
  ~$54.26→
• FAG (Schaeffler)5231145.000 mm × 105.000 mm × 64.000 mm
  ~$59.10→
• Timken5231145.000 mm × 105.000 mm × 64.000 mm
  ~$57.17→
• KOYO (JTEKT)5231145.000 mm × 105.000 mm × 64.000 mm
  ~$53.29→
• INA (Schaeffler)5231145.000 mm × 105.000 mm × 64.000 mm
  ~$48.45→
• MinebeaMitsumi (NMB)5231145.000 mm × 105.000 mm × 64.000 mm
  ~$48.45→
• RBC Bearings5231145.000 mm × 105.000 mm × 64.000 mm
  ~$48.45→
• Peer Bearing5231145.000 mm × 105.000 mm × 64.000 mm
  ~$48.45→
• Nachi Fujikoshi5231145.000 mm × 105.000 mm × 64.000 mm
  ~$48.45→