52408

Specifications

Double direction thrust ball bearings can accommodate axial loads in both directions, but they must not be subjected to any radial load. Their separable components facilitate mounting/dismounting and maintenance inspections, and many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit.

Cross-References(10)

• NSK5240830.000 mm × 90.000 mm × 65.000 mm
  ~$51.18→
• NTN5240830.000 mm × 90.000 mm × 65.000 mm
  ~$49.42→
• FAG (Schaeffler)5240830.000 mm × 90.000 mm × 65.000 mm
  ~$53.83→
• Timken5240830.000 mm × 90.000 mm × 65.000 mm
  ~$52.06→
• KOYO (JTEKT)5240830.000 mm × 90.000 mm × 65.000 mm
  ~$48.53→
• INA (Schaeffler)5240830.000 mm × 90.000 mm × 65.000 mm
  ~$44.12→
• MinebeaMitsumi (NMB)5240830.000 mm × 90.000 mm × 65.000 mm
  ~$44.12→
• RBC Bearings5240830.000 mm × 90.000 mm × 65.000 mm
  ~$44.12→
• Peer Bearing5240830.000 mm × 90.000 mm × 65.000 mm
  ~$44.12→
• Nachi Fujikoshi5240830.000 mm × 90.000 mm × 65.000 mm
  ~$44.12→