6319/HC5C3S0

Specifications

Hybrid ceramic single row deep groove ball bearings have rings made of bearing steel and rolling elements made of bearing grade silicon nitride, which make the bearings electrically insulating. Deep groove ball bearings are the most widely used bearing type, especially in electric motors. The ceramic rolling elements not only provide protection from electric current damage but also, when compared to same-sized bearings with steel rolling elements, provide enhanced bearing performance, extended bearing service life, higher speed capability, high wear-resistance, high bearing stiffness, reduced risk of smearing and false brinelling, and less sensitivity to temperature gradients. These characteristics make them suitable for use in difficult conditions and contaminated environments. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

Cross-References(10)

• NSK6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$89.45→
• NTN6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$86.37→
• FAG (Schaeffler)6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$94.08→
• Timken6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$90.99→
• KOYO (JTEKT)6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$84.82→
• INA (Schaeffler)6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$77.11→
• MinebeaMitsumi (NMB)6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$77.11→
• RBC Bearings6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$77.11→
• Peer Bearing6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$77.11→
• Nachi Fujikoshi6319/HC5C3S095.000 mm × 200.000 mm × 45.000 mm
  ~$77.11→