7011 ACEGA/HCP4AL

Specifications

These super-precision, high-speed, E design, single row angular contact ball bearings accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed for high-speed operation and, compared to SKF B design high-speed bearings, have a slightly higher speed capability and can accommodate heavier loads. Being universally matchable, they can be used together in arrangements to provide effective load sharing, within a predetermined preload range, without the use of shims or similar devices. They have two lubrication holes in their outer rings, an annular groove, and two annular O-ring grooves in their outer rings.

Cross-References(10)

• NSK7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$30.11→
• NTN7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$29.07→
• FAG (Schaeffler)7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$31.67→
• Timken7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$30.63→
• KOYO (JTEKT)7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$28.55→
• INA (Schaeffler)7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$25.96→
• MinebeaMitsumi (NMB)7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$25.96→
• RBC Bearings7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$25.96→
• Peer Bearing7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$25.96→
• Nachi Fujikoshi7011 ACEGA/HCP4AL55.000 mm × 90.000 mm × 18.000 mm
  ~$25.96→