709 CE/HCP4ATGA

Specifications

These sets of three matched super-precision angular contact ball bearings are available as universally matchable bearings or as preconfigured arrangements. Sets arranged in back-to-back and tandem, or face-to-face and tandem, are available in different preload classes and correct mounting results in preload within a predetermined range, without the need for shims or similar devices. Sets of three bearings paired in tandem need to be mounted against a single bearing, or another set of bearings in tandem, to achieve the desired preload. The bore and outside diameters of the bearings are matched to within a maximum of one-third of the permitted diameter tolerance, to provide better load distribution than single universally matchable bearings.

Cross-References(10)

• NSK709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$14.54→
• NTN709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$14.03→
• FAG (Schaeffler)709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$15.29→
• Timken709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$14.79→
• KOYO (JTEKT)709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$13.78→
• INA (Schaeffler)709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$12.53→
• MinebeaMitsumi (NMB)709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$12.53→
• RBC Bearings709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$12.53→
• Peer Bearing709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$12.53→
• Nachi Fujikoshi709 CE/HCP4ATGA9.000 mm × 24.000 mm × 21.000 mm
  ~$12.53→