What replaces SKF 71906 CE/HCP4AQGA?

The 71906 CE/HCP4AQGA can be replaced by equivalent bearings from other manufacturers: NSK 71906 CE/HCP4AQGA, NTN 71906 CE/HCP4AQGA, FAG (Schaeffler) 71906 CE/HCP4AQGA, Timken 71906 CE/HCP4AQGA, KOYO (JTEKT) 71906 CE/HCP4AQGA. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the 71906 CE/HCP4AQGA?

The SKF 71906 CE/HCP4AQGA has a bore diameter of 30.000mm, outer diameter of 47.000mm, and width of 36.000mm.

How much does a SKF 71906 CE/HCP4AQGA cost?

The 71906 CE/HCP4AQGA is available from approximately $30.45. Prices vary by supplier and quantity.

SKF

Bearing

71906 CE/HCP4AQGA

Name: SKF 71906 CE/HCP4AQGA
Brand: SKF
SKU: 71906 CE/HCP4AQGA
Availability: InStock

Matched set of four super-precision, high-speed E design, single row angular contact ball bearings

From ~$30.45at Zoro

Zoro ↗·Amazon ↗

$30.45 part + $1.52 service fee · Supplied by Zoro

Specifications

Bore (d)	30.000 mm
Outer Diameter (D)	47.000 mm
Width (B)	36.000 mm
Seal Type	Open
Bearing Type	Angular Contact
Dynamic Load (C)	14.800 kN
Static Load (C₀)	12.900 kN
Speed — Grease	16,667 RPM
Speed — Oil	22,333 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN/Normal

These sets of four matched super-precision angular contact ball bearings are available as universally matchable bearings or in preconfigured arrangements. Sets of four bearings arranged in tandem need to be mounted against a single bearing, or a set of bearings in tandem, to achieve the desired preload. All the other arrangements are available in different preload classes and correct mounting results in preload within a predetermined range, without the need for shims or similar devices. The bore and outside diameters of the bearings are matched to within a maximum of one-third of the permitted diameter tolerance, to provide better load distribution than single universally matchable bearings.

Cross-References(10)

Need help finding the right bearing?

Ask BearingBrain →