71910 ACEGA/HCP4AL

Specifications

These super-precision, high-speed, E design, single row angular contact ball bearings accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed for high-speed operation and, compared to SKF B design high-speed bearings, have a slightly higher speed capability and can accommodate heavier loads. Being universally matchable, they can be used together in arrangements to provide effective load sharing, within a predetermined preload range, without the use of shims or similar devices. They have two lubrication holes in their outer rings, an annular groove, and two annular O-ring grooves in their outer rings.

Cross-References(10)

• NSK71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$25.28→
• NTN71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$24.41→
• FAG (Schaeffler)71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$26.59→
• Timken71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$25.71→
• KOYO (JTEKT)71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$23.97→
• INA (Schaeffler)71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→
• MinebeaMitsumi (NMB)71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→
• RBC Bearings71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→
• Peer Bearing71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→
• Nachi Fujikoshi71910 ACEGA/HCP4AL50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→