71911 ACDGA/HCP4AL

Specifications

These super-precision, high-capacity, single row angular contact ball bearings accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures. Being universally matchable, they can be used together in arrangements to provide effective load sharing, within a predetermined preload range, without the use of shims or similar devices. They have two lubrication holes, an annular groove, and two annular O-ring grooves in their outer rings.

Cross-References(10)

• NSK71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$28.17→
• NTN71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$27.20→
• FAG (Schaeffler)71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$29.63→
• Timken71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$28.66→
• KOYO (JTEKT)71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$26.71→
• INA (Schaeffler)71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$24.28→
• MinebeaMitsumi (NMB)71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$24.28→
• RBC Bearings71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$24.28→
• Peer Bearing71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$24.28→
• Nachi Fujikoshi71911 ACDGA/HCP4AL55.000 mm × 80.000 mm × 13.000 mm
  ~$24.28→