SKF
Bearing71918 ACDGA/HCP4AL
Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Specifications
| Bore (d) | 90.000 mm |
| Outer Diameter (D) | 125.000 mm |
| Width (B) | 18.000 mm |
| Seal Type | Open |
| Bearing Type | Angular Contact |
| Dynamic Load (C) | 44.200 kN |
| Static Load (C₀) | 48.000 kN |
| Speed — Grease | 5,556 RPM |
| Speed — Oil | 7,444 RPM |
| Temperature Range | -30°C to 120°C |
| Rows | 1 |
| Clearance | CN/Normal |
These super-precision, high-capacity, single row angular contact ball bearings accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures. Being universally matchable, they can be used together in arrangements to provide effective load sharing, within a predetermined preload range, without the use of shims or similar devices. They have two lubrication holes, an annular groove, and two annular O-ring grooves in their outer rings.
Cross-References(10)
- NSK71918 ACDGA/HCP4AL~$44.81→
- NTN71918 ACDGA/HCP4AL~$43.26→
- FAG (Schaeffler)71918 ACDGA/HCP4AL~$47.13→
- Timken71918 ACDGA/HCP4AL~$45.58→
- KOYO (JTEKT)71918 ACDGA/HCP4AL~$42.49→
- INA (Schaeffler)71918 ACDGA/HCP4AL~$38.63→
- MinebeaMitsumi (NMB)71918 ACDGA/HCP4AL~$38.63→
- RBC Bearings71918 ACDGA/HCP4AL~$38.63→
- Peer Bearing71918 ACDGA/HCP4AL~$38.63→
- Nachi Fujikoshi71918 ACDGA/HCP4AL~$38.63→
Need help finding the right bearing?