SKF
Bearing71920 ACEGA/HCP4AL
Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Specifications
| Bore (d) | 100.000 mm |
| Outer Diameter (D) | 140.000 mm |
| Width (B) | 20.000 mm |
| Seal Type | Open |
| Bearing Type | Angular Contact |
| Dynamic Load (C) | 37.100 kN |
| Static Load (C₀) | 30.000 kN |
| Speed — Grease | 5,000 RPM |
| Speed — Oil | 6,700 RPM |
| Temperature Range | -30°C to 120°C |
| Rows | 1 |
| Clearance | CN/Normal |
These super-precision, high-speed, E design, single row angular contact ball bearings accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed for high-speed operation and, compared to SKF B design high-speed bearings, have a slightly higher speed capability and can accommodate heavier loads. Being universally matchable, they can be used together in arrangements to provide effective load sharing, within a predetermined preload range, without the use of shims or similar devices. They have two lubrication holes in their outer rings, an annular groove, and two annular O-ring grooves in their outer rings.
Cross-References(10)
- NSK71920 ACEGA/HCP4AL~$47.85→
- NTN71920 ACEGA/HCP4AL~$46.20→
- FAG (Schaeffler)71920 ACEGA/HCP4AL~$50.33→
- Timken71920 ACEGA/HCP4AL~$48.68→
- KOYO (JTEKT)71920 ACEGA/HCP4AL~$45.38→
- INA (Schaeffler)71920 ACEGA/HCP4AL~$41.25→
- MinebeaMitsumi (NMB)71920 ACEGA/HCP4AL~$41.25→
- RBC Bearings71920 ACEGA/HCP4AL~$41.25→
- Peer Bearing71920 ACEGA/HCP4AL~$41.25→
- Nachi Fujikoshi71920 ACEGA/HCP4AL~$41.25→
Need help finding the right bearing?