71922 ACEGA/HCP4AL

Specifications

These super-precision, high-speed, E design, single row angular contact ball bearings accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed for high-speed operation and, compared to SKF B design high-speed bearings, have a slightly higher speed capability and can accommodate heavier loads. Being universally matchable, they can be used together in arrangements to provide effective load sharing, within a predetermined preload range, without the use of shims or similar devices. They have two lubrication holes in their outer rings, an annular groove, and two annular O-ring grooves in their outer rings.

Cross-References(10)

• NSK71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$51.01→
• NTN71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$49.25→
• FAG (Schaeffler)71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$53.65→
• Timken71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$51.89→
• KOYO (JTEKT)71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$48.37→
• INA (Schaeffler)71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$43.97→
• MinebeaMitsumi (NMB)71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$43.97→
• RBC Bearings71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$43.97→
• Peer Bearing71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$43.97→
• Nachi Fujikoshi71922 ACEGA/HCP4AL110.000 mm × 150.000 mm × 20.000 mm
  ~$43.97→