71930 ACD/P4AQGA

Specifications

These sets of four matched super-precision angular contact ball bearings are available as universally matchable bearings or in preconfigured arrangements. Sets of four bearings arranged in tandem need to be mounted against a single bearing, or a set of bearings in tandem, to achieve the desired preload. All the other arrangements are available in different preload classes and correct mounting results in preload within a predetermined range, without the need for shims or similar devices. The bore and outside diameters of the bearings are matched to within a maximum of one-third of the permitted diameter tolerance, to provide better load distribution than single universally matchable bearings.

Cross-References(10)

• NSK71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$130.93→
• NTN71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$126.41→
• FAG (Schaeffler)71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$137.70→
• Timken71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$133.19→
• KOYO (JTEKT)71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$124.16→
• INA (Schaeffler)71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$112.87→
• MinebeaMitsumi (NMB)71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$112.87→
• RBC Bearings71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$112.87→
• Peer Bearing71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$112.87→
• Nachi Fujikoshi71930 ACD/P4AQGA150.000 mm × 210.000 mm × 112.000 mm
  ~$112.87→