71944 CD/P4ATBTA

Specifications

These sets of three matched super-precision angular contact ball bearings are available as universally matchable bearings or as preconfigured arrangements. Sets arranged in back-to-back and tandem, or face-to-face and tandem, are available in different preload classes and correct mounting results in preload within a predetermined range, without the need for shims or similar devices. Sets of three bearings paired in tandem need to be mounted against a single bearing, or another set of bearings in tandem, to achieve the desired preload. The bore and outside diameters of the bearings are matched to within a maximum of one-third of the permitted diameter tolerance, to provide better load distribution than single universally matchable bearings.

Cross-References(10)

• NSK71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$180.50→
• NTN71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$174.27→
• FAG (Schaeffler)71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$189.83→
• Timken71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$183.61→
• KOYO (JTEKT)71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$171.16→
• INA (Schaeffler)71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$155.60→
• MinebeaMitsumi (NMB)71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$155.60→
• RBC Bearings71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$155.60→
• Peer Bearing71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$155.60→
• Nachi Fujikoshi71944 CD/P4ATBTA220.000 mm × 300.000 mm × 114.000 mm
  ~$155.60→