7211 BECBP

Specifications

These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.

Cross-References(24)

• NSK7211 BEA55.000 mm × 100.000 mm × 21.000 mm
  ~$35.46→
• FAG (Schaeffler)7211 B.TVP55.000 mm × 100.000 mm × 21.000 mm
  ~$37.49→
• Timken721155.000 mm × 100.000 mm × 21.000 mm
  ~$36.15→
• NTN7211 BEA55.000 mm × 100.000 mm × 21.000 mm
  ~$34.19→
• KOYO (JTEKT)7211 BEA55.000 mm × 100.000 mm × 21.000 mm
  ~$33.51→
• KOYO (JTEKT)7211 BEA55.000 mm × 100.000 mm × 21.000 mm
  ~$33.51→
• NTN7211 BEA55.000 mm × 100.000 mm × 21.000 mm
  ~$34.19→
• Timken721155.000 mm × 100.000 mm × 21.000 mm
  ~$36.15→
• FAG (Schaeffler)7211 B.TVP55.000 mm × 100.000 mm × 21.000 mm
  ~$37.49→
• NSK7211 BEA55.000 mm × 100.000 mm × 21.000 mm
  ~$35.46→
• INA (Schaeffler)7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$31.28→
• NSK7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$36.28→
• NTN7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$35.03→
• FAG (Schaeffler)7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$38.16→
• Timken7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$36.91→
• KOYO (JTEKT)7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$34.41→
• MinebeaMitsumi (NMB)7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$31.28→
• RBC Bearings7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$31.28→
• Peer Bearing7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$31.28→
• Nachi Fujikoshi7211 BECBP55.000 mm × 100.000 mm × 21.000 mm
  ~$31.28→
• NSK7211A55.000 mm × 100.000 mm × 21.000 mm
  $82.50→
• FAG (Schaeffler)7211-B-XL-TVP55.000 mm × 100.000 mm × 21.000 mm
  $82.50→
• NTN721155.000 mm × 100.000 mm × 21.000 mm
  $82.50→
• KOYO (JTEKT)7211B55.000 mm × 100.000 mm × 21.000 mm
  $82.50→