GEP 140 FS

Specifications

These radial spherical plain bearings have a steel/PTFE FRP sliding contact surface combination. They are factory greased and maintenance-free. However, relubrication can extend bearing service life and can be applied via lubrication holes and an annular groove in both rings. Compared to the GEC design (axially split outer ring), the GEP design (radially split) has a wider and larger outside diameter for a given shaft size. This results in a higher basic load rating, but a smaller tilt angle.

Cross-References(10)

• NSKGEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$251.43→
• NTNGEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$242.76→
• FAG (Schaeffler)GEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$264.44→
• TimkenGEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$255.77→
• KOYO (JTEKT)GEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$238.43→
• INA (Schaeffler)GEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$216.75→
• MinebeaMitsumi (NMB)GEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$216.75→
• RBC BearingsGEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$216.75→
• Peer BearingGEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$216.75→
• Nachi FujikoshiGEP 140 FS140.000 mm × 210.000 mm × 100.000 mm
  ~$216.75→