What replaces SKF GEP 180 FS?

The GEP 180 FS can be replaced by equivalent bearings from other manufacturers: NSK GEP 180 FS, NTN GEP 180 FS, FAG (Schaeffler) GEP 180 FS, Timken GEP 180 FS, KOYO (JTEKT) GEP 180 FS. These are dimensional interchanges with matching bore, OD, and width.

What are the dimensions of the GEP 180 FS?

The SKF GEP 180 FS has a bore diameter of 180.000mm, outer diameter of 260.000mm, and width of 128.000mm.

How much does a SKF GEP 180 FS cost?

The GEP 180 FS is available from approximately $437.50. Prices vary by supplier and quantity.

SKF

Bearing

GEP 180 FS

Name: SKF GEP 180 FS
Brand: SKF
SKU: GEP 180 FS
Availability: InStock

Radial spherical plain bearing, maintenance-free, metric sizes

From ~$437.50at Zoro

Zoro ↗·Amazon ↗

$437.50 part + $21.88 service fee · Supplied by Zoro

Specifications

Bore (d)	180.000 mm
Outer Diameter (D)	260.000 mm
Width (B)	128.000 mm
Seal Type	Open
Bearing Type	Spherical Roller
Dynamic Load (C)	2080.000 kN
Static Load (C₀)	3100.000 kN
Speed — Grease	2,778 RPM
Speed — Oil	3,722 RPM
Temperature Range	-30°C to 120°C
Rows	1
Clearance	CN/Normal

These radial spherical plain bearings have a steel/PTFE FRP sliding contact surface combination. They are factory greased and maintenance-free. However, relubrication can extend bearing service life and can be applied via lubrication holes and an annular groove in both rings. Compared to the GEC design (axially split outer ring), the GEP design (radially split) has a wider and larger outside diameter for a given shaft size. This results in a higher basic load rating, but a smaller tilt angle.

Cross-References(10)

Need help finding the right bearing?

Ask BearingBrain →