SKF
BearingGEP 320 FS
Radial spherical plain bearing, maintenance-free, metric sizes
Specifications
| Bore (d) | 320.000 mm |
| Outer Diameter (D) | 460.000 mm |
| Width (B) | 230.000 mm |
| Seal Type | Open |
| Bearing Type | Spherical Roller |
| Dynamic Load (C) | 6400.000 kN |
| Static Load (C₀) | 9650.000 kN |
| Speed — Grease | 2,000 RPM |
| Speed — Oil | 3,000 RPM |
| Temperature Range | -30°C to 120°C |
| Rows | 1 |
| Clearance | CN/Normal |
These radial spherical plain bearings have a steel/PTFE FRP sliding contact surface combination. They are factory greased and maintenance-free. However, relubrication can extend bearing service life and can be applied via lubrication holes and an annular groove in both rings. Compared to the GEC design (axially split outer ring), the GEP design (radially split) has a wider and larger outside diameter for a given shaft size. This results in a higher basic load rating, but a smaller tilt angle.
Cross-References(10)
- NSKGEP 320 FS~$1,079.50→
- NTNGEP 320 FS~$1,042.27→
- FAG (Schaeffler)GEP 320 FS~$1,135.33→
- TimkenGEP 320 FS~$1,098.11→
- KOYO (JTEKT)GEP 320 FS~$1,023.66→
- INA (Schaeffler)GEP 320 FS~$930.60→
- MinebeaMitsumi (NMB)GEP 320 FS~$930.60→
- RBC BearingsGEP 320 FS~$930.60→
- Peer BearingGEP 320 FS~$930.60→
- Nachi FujikoshiGEP 320 FS~$930.60→
Need help finding the right bearing?