SKF
BearingNU 1007 ECPH/HC5C3
Hybrid ceramic single row cylindrical roller bearing, NU design
Specifications
| Bore (d) | 35.000 mm |
| Outer Diameter (D) | 62.000 mm |
| Width (B) | 14.000 mm |
| Seal Type | Open |
| Bearing Type | cylindrical |
| Dynamic Load (C) | 35.800 kN |
| Static Load (C₀) | 38.000 kN |
| Speed — Grease | 13,000 RPM |
| Speed — Oil | 16,000 RPM |
| Temperature Range | -30°C to 120°C |
| Rows | 1 |
Hybrid ceramic single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. With rings made of bearing steel and rollers made of bearing grade silicon nitride, the bearings are electrically insulating. The ceramic rollers not only protect against electric current damage, but also extend bearing service life by offering enhanced bearing performance, even under difficult operating conditions. Having two integral flanges on the outer ring and no flanges on the inner ring, NU design bearings can accommodate axial displacement in both directions. The separable design facilitates mounting and enables the bearing components to be interchanged.
Need help finding the right bearing?