SKF
BearingNU 210 ECM/HC5C3HVA301
Hybrid ceramic single row cylindrical roller bearing, NU design
From ~$40.04at Zoro
Direct checkout is available only for fulfillment-ready partners. Use the supplier link above to purchase this listing or contact us for a verified quote.
Specifications
| Bore (d) | 50.000 mm |
| Outer Diameter (D) | 90.000 mm |
| Width (B) | 20.000 mm |
| Seal Type | Open |
| Bearing Type | cylindrical |
| Dynamic Load (C) | 64.400 kN |
| Static Load (C₀) | 69.500 kN |
| Speed — Grease | 9,000 RPM |
| Speed — Oil | 11,000 RPM |
| Temperature Range | -30°C to 120°C |
| Rows | 1 |
| Clearance | CN/Normal |
Hybrid ceramic single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. With rings made of bearing steel and rollers made of bearing grade silicon nitride, the bearings are electrically insulating. The ceramic rollers not only protect against electric current damage, but also extend bearing service life by offering enhanced bearing performance, even under difficult operating conditions. Having two integral flanges on the outer ring and no flanges on the inner ring, NU design bearings can accommodate axial displacement in both directions. The separable design facilitates mounting and enables the bearing components to be interchanged.
Cross-References(10)
- NSKNU 210 ECM/HC5C3HVA301~$36.28→
- NTNNU 210 ECM/HC5C3HVA301~$35.03→
- FAG (Schaeffler)NU 210 ECM/HC5C3HVA301~$38.16→
- TimkenNU 210 ECM/HC5C3HVA301~$36.91→
- KOYO (JTEKT)NU 210 ECM/HC5C3HVA301~$34.41→
- INA (Schaeffler)NU 210 ECM/HC5C3HVA301~$31.28→
- MinebeaMitsumi (NMB)NU 210 ECM/HC5C3HVA301~$31.28→
- RBC BearingsNU 210 ECM/HC5C3HVA301~$31.28→
- Peer BearingNU 210 ECM/HC5C3HVA301~$31.28→
- Nachi FujikoshiNU 210 ECM/HC5C3HVA301~$31.28→
Need help finding the right bearing?