S7012 ACE/HCP4ATBTA

Specifications

These sets of three matched super-precision angular contact ball bearings are available as universally matchable bearings or as preconfigured arrangements. Sets arranged in back-to-back and tandem, or face-to-face and tandem, are available in different preload classes and correct mounting results in preload within a predetermined range, without the need for shims or similar devices. Sets of three bearings paired in tandem need to be mounted against a single bearing, or another set of bearings in tandem, to achieve the desired preload. The bore and outside diameters of the bearings are matched to within a maximum of one-third of the permitted diameter tolerance, to provide better load distribution than single universally matchable bearings.

Cross-References(10)

• NSKS7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$46.85→
• NTNS7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$45.23→
• FAG (Schaeffler)S7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$49.27→
• TimkenS7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$47.66→
• KOYO (JTEKT)S7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$44.43→
• INA (Schaeffler)S7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$40.39→
• MinebeaMitsumi (NMB)S7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$40.39→
• RBC BearingsS7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$40.39→
• Peer BearingS7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$40.39→
• Nachi FujikoshiS7012 ACE/HCP4ATBTA60.000 mm × 95.000 mm × 54.000 mm
  ~$40.39→