S7018 CD/P4ATBTA

Specifications

These sets of three matched super-precision angular contact ball bearings are available as universally matchable bearings or as preconfigured arrangements. Sets arranged in back-to-back and tandem, or face-to-face and tandem, are available in different preload classes and correct mounting results in preload within a predetermined range, without the need for shims or similar devices. Sets of three bearings paired in tandem need to be mounted against a single bearing, or another set of bearings in tandem, to achieve the desired preload. The bore and outside diameters of the bearings are matched to within a maximum of one-third of the permitted diameter tolerance, to provide better load distribution than single universally matchable bearings.

Cross-References(10)

• NSKS7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$82.17→
• NTNS7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$79.34→
• FAG (Schaeffler)S7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$86.42→
• TimkenS7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$83.59→
• KOYO (JTEKT)S7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$77.92→
• INA (Schaeffler)S7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$70.84→
• MinebeaMitsumi (NMB)S7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$70.84→
• RBC BearingsS7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$70.84→
• Peer BearingS7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$70.84→
• Nachi FujikoshiS7018 CD/P4ATBTA90.000 mm × 140.000 mm × 72.000 mm
  ~$70.84→