S71910 ACE/HCP4A

Specifications

These super-precision, high-speed E design, single row angular contact ball bearings, with 25° contact angle, with seals, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate very high speeds. Compared to the equivalent SKF B design high-speed bearings, have a slightly higher speed capability and can accommodate heavier loads.

Cross-References(10)

• NSKS71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$25.28→
• NTNS71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$24.41→
• FAG (Schaeffler)S71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$26.59→
• TimkenS71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$25.71→
• KOYO (JTEKT)S71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$23.97→
• INA (Schaeffler)S71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→
• MinebeaMitsumi (NMB)S71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→
• RBC BearingsS71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→
• Peer BearingS71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→
• Nachi FujikoshiS71910 ACE/HCP4A50.000 mm × 72.000 mm × 12.000 mm
  ~$21.79→