S71911 FE/HCP4AQGA

Specifications

These sets of four matched super-precision angular contact ball bearings are available as universally matchable bearings or in preconfigured arrangements. Sets of four bearings arranged in tandem need to be mounted against a single bearing, or a set of bearings in tandem, to achieve the desired preload. All the other arrangements are available in different preload classes and correct mounting results in preload within a predetermined range, without the need for shims or similar devices. The bore and outside diameters of the bearings are matched to within a maximum of one-third of the permitted diameter tolerance, to provide better load distribution than single universally matchable bearings.

Cross-References(10)

• NSKS71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$44.82→
• NTNS71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$43.27→
• FAG (Schaeffler)S71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$47.14→
• TimkenS71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$45.59→
• KOYO (JTEKT)S71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$42.50→
• INA (Schaeffler)S71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$38.64→
• MinebeaMitsumi (NMB)S71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$38.64→
• RBC BearingsS71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$38.64→
• Peer BearingS71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$38.64→
• Nachi FujikoshiS71911 FE/HCP4AQGA55.000 mm × 80.000 mm × 52.000 mm
  ~$38.64→