S71912 ACE/HCP4A

Specifications

These super-precision, high-speed E design, single row angular contact ball bearings, with 25° contact angle, with seals, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate very high speeds. Compared to the equivalent SKF B design high-speed bearings, have a slightly higher speed capability and can accommodate heavier loads.

Cross-References(10)

• NSKS71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$29.30→
• NTNS71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$28.29→
• FAG (Schaeffler)S71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$30.82→
• TimkenS71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$29.81→
• KOYO (JTEKT)S71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$27.79→
• INA (Schaeffler)S71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$25.26→
• MinebeaMitsumi (NMB)S71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$25.26→
• RBC BearingsS71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$25.26→
• Peer BearingS71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$25.26→
• Nachi FujikoshiS71912 ACE/HCP4A60.000 mm × 85.000 mm × 13.000 mm
  ~$25.26→