NTN 206

Deep groove ball · Open

The seat — 30 MM × 62 MM × 16 MM

Bore

30 MM

Outside dia

62 MM

Width

16 MM

Type

Deep groove ball

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

20.9 kN

Static C0

16.3 kN

184 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 21 designations · top 20 shown

Part number	Manufacturer	C	C0
6206 ETN9	NTN	23.4 kN	12.9 kN
206 NR	NTN	20.9 kN	16.3 kN
206K	Timken	20.3 kN	11.2 kN
6206	NTN	20.3 kN	11.2 kN
6206-2RZ	NTN	20.3 kN	11.2 kN
6206-RZ	NTN	20.3 kN	11.2 kN
6206-ZNR	NTN	20.3 kN	11.2 kN
6206 JEM	NTN	20.3 kN	11.2 kN
6206 N	NTN	20.3 kN	11.2 kN
6206 NR	NTN	20.3 kN	11.2 kN
6206 NRJEM	NTN	20.3 kN	11.2 kN
6206 RSJEM	NTN	20.3 kN	11.2 kN
6206 ZJEM	NTN	20.3 kN	11.2 kN
MRC.206S	NTN	20.3 kN	11.2 kN
MRC.206SFF	NTN	20.3 kN	11.2 kN
MRC.206SG	NTN	20.3 kN	11.2 kN
PER.6206-2RLDV2	NTN	19.5 kN	11.3 kN
PER.6206-DV2	NTN	19.5 kN	11.3 kN
W 6206	NTN	16.5 kN	11.2 kN
6206/VA201	NTN	—	11.2 kN

Check before substituting — 163 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 206 ECP	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 206 ECJ	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 206 ECJ/C3	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 206 ECML	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 206 ECML/C3	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 206 ECP	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 206 ECP/C3	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 206 ECJ	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 206 ECJ/C3	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 206 ECKP/C3	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 206 ECML	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 206 ECP	NTN	44.0 kN	Type: Cylindrical — this part: Deep groove ball

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/206/SUBSTITUTE