NTN 207

Deep groove ball · Open

The seat — 35 MM × 72 MM × 17 MM

Bore

35 MM

Outside dia

72 MM

Width

17 MM

Type

Deep groove ball

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

27.5 kN

Static C0

22.0 kN

169 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 26 designations · top 20 shown

Part number	Manufacturer	C	C0
207-ZNR	NTN	27.5 kN	22.0 kN
207 NR	NTN	27.5 kN	22.0 kN
MRC.207M	NTN	27.5 kN	22.0 kN
MRC.207MF	NTN	27.5 kN	22.0 kN
MRC.207MFF	NTN	27.5 kN	22.0 kN
MRC.207MFG	NTN	27.5 kN	22.0 kN
MRC.207MG	NTN	27.5 kN	22.0 kN
6207-ZNR	NTN	27.0 kN	15.3 kN
6207 JEM	NTN	27.0 kN	15.3 kN
6207 N	NTN	27.0 kN	15.3 kN
6207 NR	NTN	27.0 kN	15.3 kN
6207 NRJEM	NTN	27.0 kN	15.3 kN
6207 RSJEM	NTN	27.0 kN	15.3 kN
6207 ZJEM	NTN	27.0 kN	15.3 kN
6207 ZNRJEM	NTN	27.0 kN	15.3 kN
MRC.207S	NTN	27.0 kN	15.3 kN
MRC.207SF	NTN	27.0 kN	15.3 kN
MRC.207SFF	NTN	27.0 kN	15.3 kN
MRC.207SFFG	NTN	27.0 kN	15.3 kN
MRC.207SG	NTN	27.0 kN	15.3 kN

Check before substituting — 143 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 207 ECM	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball
N 207 ECP	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 207 ECJ	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 207 ECJ/C3	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 207 ECM	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 207 ECML	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 207 ECP	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 207 ECP/C3	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 207 ECPH	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 207 ECPH/C4	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C4 — this part: CN (Normal)
NU 207 ECJ	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 207 ECJ/C3	NTN	56.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/207/SUBSTITUTE