NTN 208-ZNR

Deep groove ball · Open

The seat — 40 MM × 80 MM × 18 MM

Bore

40 MM

Outside dia

80 MM

Width

18 MM

Type

Deep groove ball

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

33.6 kN

Static C0

27.0 kN

189 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 29 designations · top 20 shown

Part number	Manufacturer	C	C0
208	NTN	33.6 kN	27.0 kN
208 N	NTN	33.6 kN	27.0 kN
208 NR	NTN	33.6 kN	27.0 kN
MRC.208M	NTN	33.6 kN	27.0 kN
MRC.208MF	NTN	33.6 kN	27.0 kN
MRC.208MFF	NTN	33.6 kN	27.0 kN
MRC.208MFG	NTN	33.6 kN	27.0 kN
MRC.208MG	NTN	33.6 kN	27.0 kN
PER.6208-2RLD	NTN	32.6 kN	20.0 kN
PER.6208-2RLDV2	NTN	32.6 kN	19.9 kN
PER.6208-DV2	NTN	32.6 kN	20.0 kN
PER.6208K-2RLDV2-A	NTN	32.6 kN	20.0 kN
6208-2RZTN9/LHT23	NTN	32.5 kN	19.0 kN
6208-ZNR	NTN	32.5 kN	19.0 kN
6208 JEM	NTN	32.5 kN	19.0 kN
6208 N	NTN	32.5 kN	19.0 kN
6208 NR	NTN	32.5 kN	19.0 kN
6208 NRJEM	NTN	32.5 kN	19.0 kN
6208 RSJEM	NTN	32.5 kN	19.0 kN
6208 ZJEM	NTN	32.5 kN	19.0 kN

Check before substituting — 160 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 208 ECP	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball
N 208 ECPH	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 208 ECJ	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 208 ECJ/C3	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 208 ECM	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 208 ECM/C3	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 208 ECML	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 208 ECP	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 208 ECP/C3	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 208 ECPH	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 208 ECJ	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 208 ECJ/C3	NTN	62.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/208-ZNR/SUBSTITUTE