NTN 216 NR

Deep groove ball · Open

The seat — 80 MM × 140 MM × 26 MM

Bore

80 MM

Outside dia

140 MM

Width

26 MM

Type

Deep groove ball

Seal

Open

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

88.0 kN

Static C0

85.0 kN

119 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 17 designations

Part number	Manufacturer	C	C0
216	NTN	88.0 kN	85.0 kN
216-ZNR	NTN	88.0 kN	85.0 kN
MRC.216M	NTN	88.0 kN	85.0 kN
MRC.216MF	NTN	88.0 kN	85.0 kN
MRC.216MFF	NTN	88.0 kN	85.0 kN
MRC.216MG	NTN	88.0 kN	85.0 kN
6216-ZNR	NTN	72.8 kN	55.0 kN
6216 JEM	NTN	72.8 kN	55.0 kN
6216 M	NTN	72.8 kN	55.0 kN
6216 NR	NTN	72.8 kN	55.0 kN
6216 NRJEM	NTN	72.8 kN	55.0 kN
6216 RSJEM	NTN	72.8 kN	55.0 kN
6216 ZJEM	NTN	72.8 kN	55.0 kN
MRC.216S	NTN	72.8 kN	55.0 kN
MRC.216SFF	NTN	72.8 kN	55.0 kN
216K	Timken	70.2 kN	52.0 kN
6216	NTN	70.2 kN	52.0 kN

Check before substituting — 102 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
N 216 ECP	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball
N 216 ECP/C3	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 216 ECJ	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 216 ECJ/C3	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NJ 216 ECM	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 216 ECML	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball
NJ 216 ECML/C4H	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C4 — this part: CN (Normal)
NJ 216 ECP	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 216 ECJ	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 216 ECJ/C3	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)
NU 216 ECM	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball
NU 216 ECM/C3	NTN	160.0 kN	Type: Cylindrical — this part: Deep groove ball Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/216NR/SUBSTITUTE