NTN 22208

Spherical · Open

The seat — 40 MM × 80 MM × 23 MM

Bore

40 MM

Outside dia

80 MM

Width

23 MM

Type

Spherical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

62.5 kN

Static C0

38.8 kN

52 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 13 designations

Part number	Manufacturer	C	C0
C 2208 V	NTN	102.0 kN	104.0 kN
22208 E	NTN	98.5 kN	91.5 kN
22208 EK	NTN	98.5 kN	91.5 kN
C 2208 KTN9	NTN	90.0 kN	86.5 kN
C 2208 TN9	NTN	90.0 kN	86.5 kN
22208-E1-XL	FAG (Schaeffler)	80.0 kN	80.0 kN
22208CDE4	NSK	80.0 kN	80.0 kN
22208EJW33	Timken	80.0 kN	80.0 kN
22208EMD1	NTN	80.0 kN	80.0 kN
22208RHRK	KOYO (JTEKT)	80.0 kN	80.0 kN
22208/W33VA9A1	NTN	77.1 kN	93.0 kN
22208 K/W33VA9A1	NTN	77.1 kN	93.0 kN
22208 E1	FAG (Schaeffler)	65.0 kN	40.4 kN

Check before substituting — 39 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
22208 E/C2	NTN	98.5 kN	Clearance: C2 — this part: CN (Normal)
22208 E/C3	NTN	98.5 kN	Clearance: C3 — this part: CN (Normal)
22208 E/C4	NTN	98.5 kN	Clearance: C4 — this part: CN (Normal)
22208 EK/C3	NTN	98.5 kN	Clearance: C3 — this part: CN (Normal)
NJ 2208 ECJ	NTN	81.5 kN	Type: Cylindrical — this part: Spherical
NJ 2208 ECJ/C3	NTN	81.5 kN	Type: Cylindrical — this part: Spherical Clearance: C3 — this part: CN (Normal)
NJ 2208 ECML	NTN	81.5 kN	Type: Cylindrical — this part: Spherical
NJ 2208 ECP	NTN	81.5 kN	Type: Cylindrical — this part: Spherical
NJ 2208 ECP/C3	NTN	81.5 kN	Type: Cylindrical — this part: Spherical Clearance: C3 — this part: CN (Normal)
NJ 2208 ECP/C4	NTN	81.5 kN	Type: Cylindrical — this part: Spherical Clearance: C4 — this part: CN (Normal)
NJ 2208 ECPH	NTN	81.5 kN	Type: Cylindrical — this part: Spherical
NU 2208 ECJ	NTN	81.5 kN	Type: Cylindrical — this part: Spherical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/22208/SUBSTITUTE