NTN 22210 EK

Spherical · Open

The seat — 50 MM × 90 MM × 23 MM

Bore

50 MM

Outside dia

90 MM

Width

23 MM

Type

Spherical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

107.0 kN

Static C0

108.0 kN

51 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 13 designations

Part number	Manufacturer	C	C0
C 2210 V	NTN	114.0 kN	122.0 kN
22210 E	NTN	107.0 kN	108.0 kN
C 2210 KTN9	NTN	98.0 kN	100.0 kN
C 2210 TN9	NTN	98.0 kN	100.0 kN
22210/W33VA9A1	NTN	89.7 kN	110.0 kN
22210 K/W33VA9A1	NTN	89.7 kN	110.0 kN
22210-E1-XL	FAG (Schaeffler)	88.0 kN	90.0 kN
22210CDE4	NSK	88.0 kN	90.0 kN
22210EJW33	Timken	88.0 kN	90.0 kN
22210EMD1	NTN	88.0 kN	90.0 kN
22210RHRK	KOYO (JTEKT)	88.0 kN	90.0 kN
22210 E1	FAG (Schaeffler)	74.2 kN	49.5 kN
22210	NTN	71.3 kN	47.5 kN

Check before substituting — 38 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
22210 E/C2	NTN	107.0 kN	Clearance: C2 — this part: CN (Normal)
22210 E/C3	NTN	107.0 kN	Clearance: C3 — this part: CN (Normal)
22210 E/C4	NTN	107.0 kN	Clearance: C4 — this part: CN (Normal)
22210 EK/C3	NTN	107.0 kN	Clearance: C3 — this part: CN (Normal)
22210 EK/C4	NTN	107.0 kN	Clearance: C4 — this part: CN (Normal)
C 2210 TN9/C3	NTN	98.0 kN	Clearance: C3 — this part: CN (Normal)
NJ 2210 ECJ	NTN	90.0 kN	Type: Cylindrical — this part: Spherical
NJ 2210 ECJ/C3	NTN	90.0 kN	Type: Cylindrical — this part: Spherical Clearance: C3 — this part: CN (Normal)
NJ 2210 ECM	NTN	90.0 kN	Type: Cylindrical — this part: Spherical
NJ 2210 ECP	NTN	90.0 kN	Type: Cylindrical — this part: Spherical
NJ 2210 ECP/C3	NTN	90.0 kN	Type: Cylindrical — this part: Spherical Clearance: C3 — this part: CN (Normal)
NJ 2210 ECPH/C4	NTN	90.0 kN	Type: Cylindrical — this part: Spherical Clearance: C4 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/22210EK/SUBSTITUTE