NTN 230/600 CA/C3W33

Spherical · Open

The seat — 600 MM × 870 MM × 200 MM

Bore

600 MM

Outside dia

870 MM

Width

200 MM

Type

Spherical

Seal

Open

Clearance

Precision

Dynamic C

6252.0 kN

Static C0

11400.0 kN

12 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 1 designation

Part number	Manufacturer	C	C0
C 30/600 KM/C3	NTN	6300.0 kN	12200.0 kN

Check before substituting — 11 designations

Part number	Manufacturer	C	Differs from this part
C 30/600 M	NTN	6300.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CA/C083W509	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CA/C08W507	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CA/C08W509	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CA/C08W509VE664	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CA/W33	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CAK/C083W506	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CAK/C083W507	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CAK/C08W507	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CAK/HA3C084W33	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3
230/600 CAK/W33	NTN	6252.0 kN	Clearance: CN (Normal) — this part: C3

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/230%2F600CA%2FC3W33/SUBSTITUTE