NTN 2307 E-2RS1KTN9

Self-aligning ball · 2RS contact seal

The seat — 35 MM × 80 MM × 31 MM

Bore

35 MM

Outside dia

80 MM

Width

31 MM

Type

Self-aligning ball

Seal

2RS contact seal

Clearance

CN (Normal)

Precision

Dynamic C

26.5 kN

Static C0

8.5 kN

20 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 1 designation

Part number	Manufacturer	C	C0
2307 E-2RS1TN9	NTN	26.5 kN	8.5 kN

Check before substituting — 19 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NJ 2307 ECP	NTN	106.0 kN	Type: Cylindrical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
NJ 2307 ECP/C3	NTN	106.0 kN	Type: Cylindrical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal Clearance: C3 — this part: CN (Normal)
NU 2307 ECJ	NTN	106.0 kN	Type: Cylindrical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
NU 2307 ECP	NTN	106.0 kN	Type: Cylindrical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
NU 2307 ECP/C3	NTN	106.0 kN	Type: Cylindrical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal Clearance: C3 — this part: CN (Normal)
NU 2307 ECPH	NTN	106.0 kN	Type: Cylindrical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
NUP 2307 ECP	NTN	106.0 kN	Type: Cylindrical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
22307 E1	FAG (Schaeffler)	96.0 kN	Type: Spherical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
22307 E	NTN	95.0 kN	Type: Spherical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
22307	NTN	92.1 kN	Type: Spherical — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
4307 ATN9	NTN	50.7 kN	Type: Deep groove ball — this part: Self-aligning ball Seal: Open — this part: 2RS contact seal
2307 EKM	NTN	39.7 kN	Seal: Open — this part: 2RS contact seal

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/2307E-2RS1KTN9/SUBSTITUTE