NTN 231/530 CAK/C4W33

Spherical · Open

The seat — 530 MM × 870 MM × 272 MM

Bore

530 MM

Outside dia

870 MM

Width

272 MM

Type

Spherical

Seal

Open

Clearance

Precision

Dynamic C

8526.0 kN

Static C0

14000.0 kN

9 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 0 designations

No designation in this seat matches this part on all four compared fields.

Check before substituting — 9 designations

Part number	Manufacturer	C	Differs from this part
C 31/530 KM	NTN	8800.0 kN	Clearance: CN (Normal) — this part: C4
231/530 CA/C3W33	NTN	8526.0 kN	Clearance: C3 — this part: C4
231/530 CA/W33	NTN	8526.0 kN	Clearance: CN (Normal) — this part: C4
231/530 CAK/C083W507	NTN	8526.0 kN	Clearance: CN (Normal) — this part: C4
231/530 CAK/C08W507	NTN	8526.0 kN	Clearance: CN (Normal) — this part: C4
231/530 CAK/C3W33	NTN	8526.0 kN	Clearance: C3 — this part: C4
231/530 CAK/HA3C084W33	NTN	8526.0 kN	Clearance: CN (Normal) — this part: C4
231/530 CAK/W33	NTN	8526.0 kN	Clearance: CN (Normal) — this part: C4
NU 31/530 ECMA/HB1	NTN	7480.0 kN	Type: Cylindrical — this part: Spherical Clearance: CN (Normal) — this part: C4

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/231%2F530CAK%2FC4W33/SUBSTITUTE