NTN 23156 CACK/C08W507

Spherical · Open

The seat — 280 MM × 460 MM × 146 MM

Bore

280 MM

Outside dia

460 MM

Width

146 MM

Type

Spherical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

2688.0 kN

Static C0

4000.0 kN

25 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 15 designations

Part number	Manufacturer	C	C0
C 3156	NTN	2850.0 kN	4500.0 kN
C 3156 K	NTN	2850.0 kN	4500.0 kN
23156-2CS5/VT143	NTN	2788.0 kN	4250.0 kN
23156-2CS5K/VT143	NTN	2788.0 kN	4250.0 kN
23156 CC/W33	NTN	2784.0 kN	4250.0 kN
23156 CCK/C083W33	NTN	2784.0 kN	4250.0 kN
23156 CCK/C084W33	NTN	2784.0 kN	4250.0 kN
23156 CCK/W33	NTN	2784.0 kN	4250.0 kN
23156 CAC/C083W507	NTN	2688.0 kN	4000.0 kN
23156 CAC/C08W507	NTN	2688.0 kN	4000.0 kN
23156 CAC/W33	NTN	2688.0 kN	4000.0 kN
23156 CAC/W513	NTN	2688.0 kN	4000.0 kN
23156 CACK/C082W507	NTN	2688.0 kN	4000.0 kN
23156 CACK/C083W507	NTN	2688.0 kN	4000.0 kN
23156 CACK/W33	NTN	2688.0 kN	4000.0 kN

Check before substituting — 10 designations

Part number	Manufacturer	C	Differs from this part
23156 CC/C3W33	NTN	2784.0 kN	Clearance: C3 — this part: CN (Normal)
23156 CC/C4W33	NTN	2784.0 kN	Clearance: C4 — this part: CN (Normal)
23156 CCK/C3W33	NTN	2784.0 kN	Clearance: C3 — this part: CN (Normal)
23156 CCK/C4W33	NTN	2784.0 kN	Clearance: C4 — this part: CN (Normal)
23156 CCK/HA3C4W33	NTN	2784.0 kN	Clearance: C4 — this part: CN (Normal)
23156 CAC/C3W33	NTN	2688.0 kN	Clearance: C3 — this part: CN (Normal)
23156 CAC/C4W33	NTN	2688.0 kN	Clearance: C4 — this part: CN (Normal)
23156 CACK/C3W33	NTN	2688.0 kN	Clearance: C3 — this part: CN (Normal)
23156 CACK/C4W33	NTN	2688.0 kN	Clearance: C4 — this part: CN (Normal)
NU 3156 ECMA	NTN	2290.0 kN	Type: Cylindrical — this part: Spherical

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/23156CACK%2FC08W507/SUBSTITUTE