NTN 23176 CAK/W33

Spherical · Open

The seat — 380 MM × 620 MM × 194 MM

Bore

380 MM

Outside dia

620 MM

Width

194 MM

Type

Spherical

Seal

Open

Clearance

CN (Normal)

Precision

Dynamic C

4561.0 kN

Static C0

7100.0 kN

16 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 11 designations

Part number	Manufacturer	C	C0
23176-2CS5K/VT143	NTN	4561.0 kN	7100.0 kN
23176 CA/C08W507	NTN	4561.0 kN	7100.0 kN
23176 CA/W33	NTN	4561.0 kN	7100.0 kN
23176 CAK/C082W507	NTN	4561.0 kN	7100.0 kN
23176 CAK/C083W507	NTN	4561.0 kN	7100.0 kN
23176 CAK/C084S2W33X	NTN	4561.0 kN	7100.0 kN
23176 CAK/C084W33	NTN	4561.0 kN	7100.0 kN
23176 CAK/C084W507	NTN	4561.0 kN	7100.0 kN
23176 CAK/C08W507	NTN	4561.0 kN	7100.0 kN
23176 CC/W33	NTN	4561.0 kN	7100.0 kN
23176 CCK/W33	NTN	4561.0 kN	7100.0 kN

Check before substituting — 5 designations

Part number	Manufacturer	C	Differs from this part
23176 CA/C3W33	NTN	4561.0 kN	Clearance: C3 — this part: CN (Normal)
23176 CAK/C3W33	NTN	4561.0 kN	Clearance: C3 — this part: CN (Normal)
23176 CAK/C4W33	NTN	4561.0 kN	Clearance: C4 — this part: CN (Normal)
23176 CAK/HA3C4W33	NTN	4561.0 kN	Clearance: C4 — this part: CN (Normal)
C 3176 KMB/C3	NTN	4400.0 kN	Clearance: C3 — this part: CN (Normal)

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/23176CAK%2FW33/SUBSTITUTE