NTN 23264 CCK/C4W33

Spherical · Open

The seat — 320 MM × 580 MM × 208 MM

Bore

320 MM

Outside dia

580 MM

Width

208 MM

Type

Spherical

Seal

Open

Clearance

Precision

Dynamic C

4607.0 kN

Static C0

6700.0 kN

15 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 1 designation

Part number	Manufacturer	C	C0
23264 CC/C4W33	NTN	4607.0 kN	6700.0 kN

Check before substituting — 14 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
23264-2CS5K/VT143	NTN	4611.0 kN	Clearance: CN (Normal) — this part: C4
23264 CAC/C083W507	NTN	4607.0 kN	Clearance: CN (Normal) — this part: C4
23264 CAC/C08W507	NTN	4607.0 kN	Clearance: CN (Normal) — this part: C4
23264 CAC/C3W33	NTN	4607.0 kN	Clearance: C3 — this part: C4
23264 CAC/W33	NTN	4607.0 kN	Clearance: CN (Normal) — this part: C4
23264 CACK/C083W507	NTN	4607.0 kN	Clearance: CN (Normal) — this part: C4
23264 CACK/C08W507	NTN	4607.0 kN	Clearance: CN (Normal) — this part: C4
23264 CACK/C2W33	NTN	4607.0 kN	Clearance: C2 — this part: C4
23264 CACK/C3W33	NTN	4607.0 kN	Clearance: C3 — this part: C4
23264 CACK/W33	NTN	4607.0 kN	Clearance: CN (Normal) — this part: C4
23264 CC/C3W33	NTN	4607.0 kN	Clearance: C3 — this part: C4
23264 CC/W33	NTN	4607.0 kN	Clearance: CN (Normal) — this part: C4

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/23264CCK%2FC4W33/SUBSTITUTE