NTN 3306 A-2RS1NR/C3

Angular · Open

The seat — 30 MM × 72 MM × 30.20 MM

Bore

30 MM

Outside dia

72 MM

Width

30.20 MM

Type

Angular

Seal

Open

Clearance

Precision

ABEC-1 (P0)

Dynamic C

42.5 kN

Static C0

30.0 kN

22 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 10 designations

Part number	Manufacturer	C	C0
3306 A-2RS1/C3	NTN	42.5 kN	30.0 kN
3306 A-2RS1/C3LVT114F7	NTN	42.5 kN	30.0 kN
3306 A-2RS1TN9/C3MT33	NTN	42.5 kN	30.0 kN
3306 A-2Z/C3	NTN	42.5 kN	30.0 kN
3306 A-2Z/C3MT33	NTN	42.5 kN	30.0 kN
3306 A-Z/C3	NTN	42.5 kN	30.0 kN
3306 A/C3	NTN	42.5 kN	30.0 kN
3306 ANR/C3	NTN	42.5 kN	30.0 kN
3306 ATN9/C3	NTN	42.5 kN	30.0 kN
3306 A-2ZTN9/C3VT113	NTN	39.7 kN	27.5 kN

Check before substituting — 12 designations

Part number	Manufacturer	C	Differs from this part
3306 A	NTN	42.5 kN	Clearance: CN (Normal) — this part: C3
3306 A-2RS1	NTN	42.5 kN	Seal: 2RS contact seal — this part: Open Clearance: CN (Normal) — this part: C3
3306 A-2RS1/W64	NTN	42.5 kN	Seal: 2RS contact seal — this part: Open Clearance: CN (Normal) — this part: C3
3306 A-2RS1TN9/MT33	NTN	42.5 kN	Seal: 2RS contact seal — this part: Open Clearance: CN (Normal) — this part: C3
3306 A-2Z	NTN	42.5 kN	Seal: 2Z shield — this part: Open Clearance: CN (Normal) — this part: C3
3306 A-2ZTN9/MT33	NTN	42.5 kN	Seal: 2Z shield — this part: Open Clearance: CN (Normal) — this part: C3
3306 ATN9	NTN	42.5 kN	Clearance: CN (Normal) — this part: C3
MRC.5306C	NTN	42.5 kN	Clearance: CN (Normal) — this part: C3
MRC.5306CFF	NTN	42.5 kN	Clearance: CN (Normal) — this part: C3
MRC.5306CG	NTN	42.5 kN	Clearance: CN (Normal) — this part: C3
MRC.5306CZZ	NTN	42.5 kN	Seal: 2Z shield — this part: Open Clearance: CN (Normal) — this part: C3
MRC.5306CZZG	NTN	42.5 kN	Seal: 2Z shield — this part: Open Clearance: CN (Normal) — this part: C3

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/3306A-2RS1NR%2FC3/SUBSTITUTE