NTN 6005-2ZNR

Deep groove ball · 2Z shield

The seat — 25 MM × 47 MM × 12 MM

Bore

25 MM

Outside dia

47 MM

Width

12 MM

Type

Deep groove ball

Seal

2Z shield

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

11.9 kN

Static C0

6.5 kN

98 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 12 designations

Part number	Manufacturer	C	C0
6005-2Z/LHT23	NTN	11.9 kN	6.5 kN
6005-2Z/MT33	NTN	11.9 kN	6.5 kN
6005-Z	NTN	11.9 kN	6.5 kN
6005 2ZJEM	NTN	11.9 kN	6.5 kN
6005-2RZ	KOYO (JTEKT)	10.1 kN	5.8 kN
6005-2Z	NTN	10.1 kN	5.8 kN
6005ZZ	NTN	10.1 kN	5.8 kN
91005KDD	Timken	10.1 kN	5.8 kN
6005.2ZR	FAG (Schaeffler)	9.7 kN	5.5 kN
W 6005-2Z	NTN	8.7 kN	5.8 kN
6005-2Z/VA201	NTN	—	6.5 kN
6005-2Z/VA208	NTN	—	6.5 kN

Check before substituting — 86 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1005	NTN	14.2 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield
6005-2RSH/C3	NTN	11.9 kN	Seal: Open — this part: 2Z shield Clearance: C3 — this part: CN (Normal)
6005-2RSH/C3GJN	NTN	11.9 kN	Seal: Open — this part: 2Z shield Clearance: C3 — this part: CN (Normal)
6005-2RSH/VA947	NTN	11.9 kN	Seal: 2RS contact seal — this part: 2Z shield
6005-2RSH/W64	NTN	11.9 kN	Seal: 2RS contact seal — this part: 2Z shield
6005-2RSHNR	NTN	11.9 kN	Seal: 2RS contact seal — this part: 2Z shield
6005-2RSL	NTN	11.9 kN	Seal: 2RS contact seal — this part: 2Z shield
6005-2RSLTN9/C3VT162	NTN	11.9 kN	Seal: Open — this part: 2Z shield Clearance: C3 — this part: CN (Normal)
6005-2Z/C3	NTN	11.9 kN	Seal: Open — this part: 2Z shield Clearance: C3 — this part: CN (Normal)
6005-2Z/C3GJN	NTN	11.9 kN	Seal: Open — this part: 2Z shield Clearance: C3 — this part: CN (Normal)
6005-2Z/C3VT127	NTN	11.9 kN	Seal: Open — this part: 2Z shield Clearance: C3 — this part: CN (Normal)
6005-RSH	NTN	11.9 kN	Seal: 2RS contact seal — this part: 2Z shield

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/6005-2ZNR/SUBSTITUTE