NTN 6006 2ZJEM

Deep groove ball · 2Z shield

The seat — 30 MM × 55 MM × 13 MM

Bore

30 MM

Outside dia

55 MM

Width

13 MM

Type

Deep groove ball

Seal

2Z shield

Clearance

CN (Normal)

Precision

ABEC-1 (P0)

Dynamic C

13.8 kN

Static C0

8.3 kN

100 other designations in the catalogue share this bore × outside diameter × width. Each was compared on the four fields every bearing row carries — Type, Seal, Clearance, Precision — as recorded, case- and separator-insensitively. All four agreeing puts a designation in the first list; anything else, a difference or a blank, puts it in the second with the fields named.

Candidates at the recorded dimensions above

May substitute — 9 designations

Part number	Manufacturer	C	C0
6006-Z	NTN	13.8 kN	8.3 kN
MRC.106KSZZG	NTN	13.8 kN	8.3 kN
6006-2Z	NTN	13.3 kN	8.3 kN
6006ZZ	NTN	13.3 kN	8.3 kN
91006KDD	Timken	13.3 kN	8.3 kN
PER.6006-ZZD	NTN	13.2 kN	8.3 kN
6006.2ZR	FAG (Schaeffler)	12.0 kN	6.6 kN
W 6006-2Z	NTN	11.4 kN	8.2 kN
6006-2Z/VA208	NTN	—	8.3 kN

Check before substituting — 91 designations · top 12 shown

Part number	Manufacturer	C	Differs from this part
NU 1006	NTN	17.9 kN	Type: Cylindrical — this part: Deep groove ball Seal: Open — this part: 2Z shield
7006 CD/HCP4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7006 CD/P4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7006 CDGA/HCP4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7006 CDGA/P4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7006 CDGB/HCP4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7006 CDGB/P4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
7006 CDGC/P4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
S7006 CDGA/HCP4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
S7006 CDGA/P4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
S7006 CDGB/P4A	NTN	14.3 kN	Type: Angular — this part: Deep groove ball Seal: Open — this part: 2Z shield
6006-2RS1	NTN	13.8 kN	Seal: 2RS contact seal — this part: 2Z shield

What this sheet is — and what the catalogue did not say

The envelope is recorded dimensions only: the same bore, outside diameter and width. Every designation above shares all three, or it would not be on this page.
The four compared fields are Type, Seal, Clearance, Precision. Two recorded spellings were counted to mean one value and are read as one: CN/Normal = CN, and ABEC-1/P0 = P0. A third precision spelling, P0/Class4, is deliberately not equated with either — the catalogue's meaning for it has not been sourced, so it lands in the warnings where both spellings are printed for the reader to judge.
A blank is a difference. Missing is the absence of the proof, not the proof.
Cage material and ring material are never compared: the catalogue records neither, on any bearing row.
Suffixes the catalogue does not record separately — a snap ring (NR) and anything else outside those four fields — are not compared, and this sheet does not claim they match.
Ranking is recorded dynamic load, strongest first, with an unrecorded rating ranked last. It orders the lists; it is not a verdict.
Compiled from catalogue records. This is not a manufacturer interchange list, no manufacturer has confirmed any line on it, and it does not know what job the bearing is doing. Verify before fitting.

Anyone with this link can view this part and its recorded candidate comparison.

BEARINGBRAIN.COM/PART/60062ZJEM/SUBSTITUTE